£37.20 inc VAT
Sorry we're out of stock!
Enter your email address below and we’ll notify you as soon as it becomes available.
- Description
Heavy duty spring style teardrop door bumpers manufactured from impact resistant Polypropylene in black. Manufactured using heat draping technology, the resulting tear shaped provides a cushioned surface resulting in a quieter hard wearing solution for the most demanding of applications.
These bumpers are supplied 250mm high in a range of lengths from 600mm to 1200mm and can be installed singularly or paired. Additionally these bumpers can be fitted alongside our 300mm low profile bumpers where one side of the door is obstructed by steel shutters or exit doors etc.
- Supplied pre-drilled with 3 x 10mm holes either end ≤ 900mm wide.
- Supplied un-drilled on 1000 & 1200mm wide variants.
Due to the variations in door thicknesses and materials, fixings are not supplied with this product.
Additional information is available at the bottom of this page.
- Dimensions
Thickness 6mm Height 250mm (Other heights available, please see other products) Width Varies Weight 5.4kg/m² - Technical Information
Material Polypropylene Impact Strength >40 - kJ/m² (ISO 179) Water Absorption < 0,01% (ISO 62) Operating Temp -30 / +100 °C - Downloads
Disclaimer: Door construction varies considerably. It is the installer's responsibility to determine the suitability of the fixing method and ensure that drilling, cutting or any other modification will not compromise the door's structure, fire rating, acoustic performance, insulation, warranty or any other certification. Always test fit the bumper and verify all dimensions and fixing positions before carrying out any modifications. All dimensions shown are approximate. We accept no responsibility for damage, incorrect installation, or loss resulting from unsuitable fixing methods or modifications.